151
Note:
To add a MAC address to the security filter, press Add. To delete an address, click
on the edit icon ( ) for the required entry, and then press Delete.
3.6.7.2.Configuring IP Address Filters If any node presents a security risk, you can filter all traffic for this node by entering its
address into the IP Security Filter. Any packet passing through the switch that has a
source or destination IP address matching an entry in this table will be filtered.
Note:
To add an IP address to the security filter, press Add. To delete an address, click
on the edit icon ( ) for the required entry, and then press Delete.
3.6.7.3.Configuring Security Mode In default type, the switch can auto learning the MAC Address from each port.
If you want to let someone to use a specifies port and the other people can not use. You
should disable the auto learning function and setup the uplink port (if one packet’s DA
does not define in any port, it would be forwarding to the uplink port). Then you must to
set the static unicast address on the port that you allow someone to use.