Layer 2 Menu

============

Port Configuration ...

Mirror Port Configuration ...

Port Trunking Configuration ...

Static Unicast Address Configuration ...

Static Multicast Address Configuration ...

<OK>

Change the system port configuration.

Use <TAB> or arrow keys to move. <Enter> to select.

Menu

Description

Port Configuration

Enables any port, enables / disables flow control, and

 

sets communication mode to auto-negotiation, full

 

duplex or half duplex.

Mirror Port Configuration

Sets the source and target ports for mirroring.

Port Trunking Configuration

Specifies ports to group into aggregate trunks.

Static Unicast Address Table

Used to manually configure host MAC addresses in the

 

unicast table.

Static Multicast Address Table

Used to manually configure host MAC addresses in the

 

multicast table.

2.5.2.1.Configuring Port Parameters

Use the Port Configuration menu to display or set communication parameters for any port or module on the switch, including administrative status, auto-negotiation, default communication speed and duplex mode, as well as flow control in use.

31

Page 31
Image 31
LevelOne GSW-2600TXM manual Configuring Port Parameters