Parameter | Default | Description |
Management | Console | Indicates that the port settings are for direct console |
Mode | Mode | connection. |
Baud Rate | 19200 | The rate at which data is sent between devices. |
|
| Options: 9600, 19200 and 38400 baud. |
Data Bits | 8 bits | Sets the data bits of the |
|
| Options: 7, 8 |
Stop Bits | 1 bit | Sets the stop bits of the |
|
| Options: 1, 2 |
Parity | none | Sets the parity of the |
|
| Options: none / odd / even |
Timeout | 0 minutes | If no input is received from the attached device after this |
|
| interval, the current session is automatically closed. |
|
| Range: 0 - 100 minutes; where 0 indicates disabled |
Auto Refresh | 10 seconds | Sets the interval before a console session will auto refresh |
|
| the console information, such as Spanning Tree |
|
| Information, Port Configuration, Port Statistics, and RMON |
|
| Statistics. |
|
| Range: |
3.3.Main Menu
Using the onboard Web agent, you can define system parameters, manage and control the switch, and all its ports, or monitor network conditions. The interface screen includes the main menu on the left side, the menu bar beneath the image of the switch, and a list of commands beneath the menu bar. The following table briefly describes the selections available from this program.
Menu
Description
System Information Menu
System Information Provides basic system description, including contact information.
