DVMRP Routing Table
===================
Source Address Mask Upstream Nbr | Interface | Metric |
Up Time |
|
|
Page | 1 | <Apply> | Total 0 Pages |
<OK> |
| <Prev Page> | <Next Page> |
|
| The page number. | |
READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
|
|
|
| Parameter | Description |
| Source | The IP subnetwork at the root of the multicast delivery tree. This |
| Address | subnetwork contains a known multicast source. |
| Subnet Mask | Subnet mask that is used for the source address. This mask identifies |
|
| the host address bits used for routing to specific subnets. |
| Upstream Nbr | The IP address of the network device immediately upstream for this |
|
| multicast delivery tree. |
|
|
|
| Interface | The IP interface on this switch that connects to the upstream neighbor |
|
| (see chapter 2 “Displaying Subnet Information”). |
|
|
|
| Metric | The metric for this interface used to calculate distance vectors. |
| Up Time | The time elapsed since this entry was created. |
| Note: |
|
To scroll through the table, use the <Next Page> and <Prev Page> buttons. To display a specific page, set the page number in the Page field and then select <Apply>.
Displaying the DVMRP Neighbor Table
The DVMRP Neighbor Table contains the switch’s DVMRP neighbors, as discovered by receiving DVMRP protocol messages.
96
