IP Trap Managers
Specifies management stations that will receive authentication failure messages or other trap messages from the switch.
2.4.3.1.Configuring Community Names
The following figure and table describe how to configure the community strings authorized for management access. Up to 5 community names may be entered.
SNMP Configuration: SNMP Communities
==================
| Community Name | Access | Status |
1. | public | READ/WRITE | ENABLED |
2. | private | READ ONLY | ENABLED |
3. |
|
|
|
4. |
|
|
|
5. |
|
|
|
<Apply> | <OK> | <Cancel> | |
| The community name of entry 1. | ||
READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter | Description |
Community Name | A community entry authorized for management access. |
| Maximum string length: 19 characters |
Access | Management access is restricted to Read Only or Read / Write. |
Status | Sets administrative status of entry to enabled or disabled. |
Note: The default community strings are displayed on the screen.
2.4.3.2.Configuring IP Trap Managers
The following figure and table describe how to specify management stations that will receive authentication failure messages or other trap messages from the switch. Up to 5 trap managers may be entered.
24
