![Zone 2](/images/new-backgrounds/21665/21665113x1.webp)
Zone 2
In addition to the main listening room, you can also enjoy playback in another room, which we call Zone 2. For either of the rooms, you can specify a different input source.
Making Zone 2 Connections
There are two ways you can connect Zone 2 speakers:
1.Connect them directly to the AV receiver.
2.Connect them to an amp in Zone 2.
Connecting Your Zone 2 Speakers Directly to the AV receiver
This setup allows
To use this setup, you must set the “Powered Zone 2” setting to “Yes” (➔ page 43).
Main room |
|
| TV |
AV receiver | |
R | L |
Connecting the Zone Speakers to an Additional Amplifier
This setup allows
Main room |
TV |
AV receiver |
Zone 2 |
|
| IN |
R | L |
Receiver/ | |
integrated amp | |
Note |
|
• The volume of Zone 2 must be set on the Zone 2 amp.
Zone 2
Note
•With this setup, the volume of Zone 2 is controlled by the AV receiver.
•Powered Zone 2 cannot be used if “Speakers Type (Front)” is set to
En
57