iPod/iPhone Playback via Onkyo Dock
Using the Onkyo Dock
The Dock is sold separately. Models sold are different depending on the region.
For the latest information on the Onkyo Dock components, see the Onkyo web site at: http://www.onkyo.com
Before using the Onkyo Dock components, update your iPod/iPhone with the latest software, available from the Apple web site.
For supported iPod/iPhone models, see the instruction manual of the Onkyo Dock.
With the
You can use the AV receiver’s remote controller to operate your iPod/iPhone.
■System Function
The AV receiver may take several seconds to startup, so you might not hear the first few seconds of the first song.
Auto Power On
If you start iPod/iPhone playback while the AV receiver is on standby, the AV receiver will automatically turn on and select your iPod/iPhone as the input source.
Direct Change
If you start iPod/iPhone playback while listening to another input source, the AV receiver will automatically select your iPod/iPhone as the input source.
Using the AV receiver’s Remote Controller
You can use the AV receiver’s remote controller to control basic iPod/iPhone functions (➔ page 60).
■Operating Notes
•Functionality depends on your iPod/iPhone model and generation.
•Before selecting a different input source, stop your iPod/iPhone playback to prevent the AV receiver from selecting the iPod/iPhone input source by mistake.
•If any accessories are connected to your iPod/iPhone, the AV receiver may not be able to select the input source properly.
•When connecting the
•While your iPod/iPhone is in the
•The Auto Power On function will not work if you set your iPod/iPhone in the
•When Zone 2 is turned on, you can’t use Auto Power On and Direct Change functions.
•Do not turn off the power with the iPod/iPhone still connected to this unit via the
•Set your iPod/iPhone in the
•The “Charge Mode” setting must be set to “On” to enable the Auto Power On and Direct Change functions (➔ page 50).
■Using Your iPod/iPhone Alarm Clock
You can use the Alarm Clock function of your iPod/iPhone to automatically turn on your iPod/iPhone and the AV receiver at a specified time. The AV receiver’s input source will automatically be set to the PORT selector.
Note
•To use this function, your iPod/iPhone must be in the
•This function works only in Standard mode (➔ page 61).
•When you use this function, be sure to set the AV receiver’s volume control to a suitable level.
•When Zone 2 is turned on, you can’t use this function.
•This function doesn’t work when alarms sounds are set on your iPod/iPhone.
•The “Charge Mode” setting must be set to “On” to enable the Alarm Clock function (➔ page 50).
■Charging Your iPod/iPhone Battery
When the
You can specify how the power is fed to your iPod/iPhone when the AV receiver is in standby mode (➔ page 50).
Note
•When the
En
59