Make sure that each video component is properly

16, 17

connected.

 

If your TV is connected to the HDMI OUT, select

41

“- - - - -” in the “HDMI Input” setup to watch

 

composite video, and component video sources.

 

 

 

If the video source is connected to a component

17, 41

video input, you must assign that input to an input

 

selector, and your TV must be connected to either

 

the HDMI OUT or COMPONENT VIDEO OUT.

 

If the video source is connected to a composite video

17

input, your TV must be connected to the HDMI

 

OUT or the corresponding composite video output.

 

 

 

If the video source is connected to an HDMI input,

16, 41

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

While the Pure Audio listening mode is selected, the

—

video circuitry is turned off and only video signals

 

input through HDMI IN can be output.

 

 

 

On your TV, make sure that the video input to which

—

the AV receiver is connected is selected.

 

 

 

■There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is

80

not guaranteed. In addition, video signals from a PC

 

are not guaranteed.

 

 

 

When the resolution is set to any resolution not

41

supported by the TV, no video is output from the

 

HDMI outputs.

 

If the message “Resolution Error” appears on the

—

AV receiver’s display, this indicates that your TV

 

does not support the current video resolution and

 

you need to select another resolution on your DVD player.

■The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver is not connected to a TV via — HDMI, onscreen menus are not displayed.

■The on screen display does not appear

Depending on the input signal, the on screen display 52 may not appear when the input signal from the

HDMI IN is output to a device connected to the

HDMI OUT.

Tuner

■Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

—

Move the AV receiver away from your TV or

—

computer.

 

Listen to the station in mono.

26

 

 

When listening to an AM station, operating the

—

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

—

 

 

Concrete walls weaken radio signals.

—

 

 

If nothing improves the reception, install an outdoor — antenna.

Remote Controller

■ The remote controller doesn’t work

Before operating this unit, be sure to press

—

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

—

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

—

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote

11, 63

controller mode.

 

 

 

When using the remote controller to control other

—

manufacturers’ AV components, some buttons may

 

not work as expected.

 

Make sure you’ve entered the correct remote control

62

code.

 

 

 

Make sure to set the same ID on both the AV

52

receiver and remote controller.

 

 

 

■ Can’t control other components

If it’s an Onkyo component, make sure that the u

18

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t be enough.

 

 

 

Make sure you’ve selected the correct remote

11, 63

controller mode.

 

For a proper operation of the remote controller as a

38

cassette tape deck is connected to the TV/CD IN

 

jack, or as an RI Dock is connected to the TV/CD

 

IN, VCR/DVR IN or GAME IN jacks, you must set

 

the input display accordingly.

 

 

 

If you cannot operate it, you will need to enter the

62

appropriate remote control code.

 

To control another manufacturer’s component, point

62

the remote controller at that component.

 

 

 

To control an Onkyo component that’s connected

62

via u, point the remote controller at the AV

 

receiver. Be sure to enter the appropriate remote

 

control code first.

 

To control an Onkyo component that’s not

63

connected via u, point the remote controller at the

 

component. Be sure to enter the appropriate remote

 

control code first.

 

 

The entered remote control code may not be correct. —

If more than one code is listed, try each one.

 

 

 

UP-A1 Dock for iPod/iPhone

■ There’s no sound

Make sure your iPod/iPhone is actually playing.

—

Make sure your iPod/iPhone is properly inserted in

—

 

the Dock.

 

 

Make sure the UP-A1 Dock is connected to the

—

UNIVERSAL PORT jack on the AV receiver.

 

En

67

Page 66 Page 68
Page 67
Image 67
Onkyo HT-RC360 instruction manual Tuner, Remote Controller, UP-A1 Dock for iPod/iPhone
Page 66 Page 68

HT-RC360 specifications

The Onkyo HT-RC360 is a versatile home theater receiver that has garnered attention for its impressive features and solid performance. Designed to elevate the home entertainment experience, this receiver combines cutting-edge technology with user-friendly functionality.

One of the standout features of the HT-RC360 is its support for high-definition audio formats. It is equipped with Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to enjoy lossless surround sound that delivers a cinema-like experience from the comfort of their own homes. This ensures that every detail of the audio is preserved, making movies, music, and video games come to life with clarity and depth.

The receiver boasts a robust 7.2 channel amplification system, delivering a total power output of 100 watts per channel. This powerful amplification allows the HT-RC360 to drive a variety of speaker configurations, making it suitable for different room sizes and acoustics. Furthermore, the inclusion of Audyssey MultEQ room correction technology allows users to optimize the sound experience based on their specific room conditions. This results in balanced sound that is tailored to the acoustic characteristics of the space.

Connectivity options are abundant with the HT-RC360. It features multiple HDMI inputs and outputs, supporting 3D video and 4K passthrough, which is essential for modern home theater setups. Users can easily connect various devices, including Blu-ray players, gaming consoles, and streaming devices, making it a central hub for all their entertainment needs. Additionally, the receiver comes with analog and digital audio inputs, allowing flexibility in connecting legacy devices.

Another noteworthy characteristic of the Onkyo HT-RC360 is its built-in compatibility with various streaming services. It supports technologies such as Spotify Connect, allowing users to stream their favorite music directly from their smartphones or tablets. This feature enhances the convenience for users who prefer to access music libraries online without the need for physical media.

Overall, the Onkyo HT-RC360 is a remarkable home theater receiver that combines high-quality audio performance with modern connectivity features. Its powerful amplification, advanced audio decoding, and versatile streaming capabilities make it an excellent choice for anyone looking to create an immersive home entertainment experience. With the HT-RC360, users can enjoy movies, music, and gaming like never before.
Top Page Image Contents