Onkyo HT-RC360 instruction manual • Neo:6 Cinema, • Neo:6 Music, • Audyssey DSX

*1

*2

*3

*4

*5

*6

*7

*8

Listening Mode					Description	Input	Speaker
						Source	Layout
Neo:6					This mode expands any 2-channel source for up to 7.1-channel playback. It
					uses seven full-bandwidth channels of matrix decoding for matrix-encoded
					material, providing a very natural and seamless surround sound experience
					that fully envelops the listener.
					• Neo:6 Cinema	S	XCN
	N e o : 6		C i n e m a
					Use this mode with any stereo movie (e.g., TV, DVD, VHS).
					• Neo:6 Music
	N e o : 6		M u s i c		Use this mode with any stereo music source (e.g., CD, radio, cassette, TV,
					VHS, DVD).
					• Neo:6	D	V
	N e o : 6				This mode uses Neo:6 to expand 5.1-channel sources for 6.1/7.1-channel
					playback.
Audyssey DSX*8					• Audyssey DSX	D	B
					Audyssey DSX™ is a scalable system that adds new speakers to improve	F
	A u d y s s e y D S X
					surround impression. Starting with a 5.1 system Audyssey DSX adds only	G
					height channels in this deployment. The pair of Height channels reproduce
					important acoustical and perceptual cues, which greatly enhance the
					surround experience. In addition to these new Height channels,
					Audyssey DSX applies Surround Envelopment Processing to enhance the
					blend between the front and surround channels.
					• Dolby Pro Logic II Movie + Audyssey DSX	S	B
	P L	M o v i e		D S X
					• Dolby Pro Logic II Music + Audyssey DSX
					• Dolby Pro Logic II Game + Audyssey DSX
	P L	M u s i c		D S X	The combination of Dolby Pro Logic II and Audyssey DSX modes can be
					used.
	P L	G a m e		D S X

Note

(North American models) This listening mode is not available. (Chinese models) Pure Audio cannot be selected when Zone 2 is active.

Besides, if you activate Zone 2 while Pure Audio is selected, the listening mode will automatically switch to Direct. When the input source contains the encoded front high channel, the corresponding speakers output the sound.

If there are no surround back speakers, Dolby Pro Logic II is used.

For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system.

AV receiver can input the DSD signal from HDMI IN. Setting the output setting on the player side to PCM might obtain a better sound according to the player. In that case, set the output setting on the player side to PCM.

If there are no surround back speakers, DTS is used.

This listening mode can be selected only when all the following conditions are satisfied:

–Center speaker is connected.

–Front high speakers is connected.

•The listening modes cannot be selected with some source formats.

En

36