Playback, H i aj b k cl dm e n f o g p q, Selector, Page

Playback

The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

This section describes the procedure for using the remote controller unless otherwise specified.

Controlling Contents of USB or Network Devices

See “Controlling Other Components” about the operation of other components (➔ page 62).

Press USB or NET first.

Selecting the Language for the Onscreen Setup Menus

You can determine the language used for the onscreen setup menus. See “Language” in the “OSD Setup” (➔ page 52).

Playing the Connected Component

■Operating with the remote controller

1	Press RECEIVER followed by INPUT
	SELECTOR.
2	Start playback on the source component.
	See also:
	• “Playing an iPod/iPhone via USB” (➔ page 22)
	• “Playing a USB Device” (➔ page 23)
	• “Listening to Internet Radio” (➔ page 23)
	• “Playing Music Files on a Server” (➔ page 25)
	• “Remote Playback” (➔ page 25)
	• “Listening to AM/FM Radio” (➔ page 26)
	• “iPod/iPhone Playback via Onkyo Dock”
	(➔ page 59)
	• “Controlling Other Components” (➔ page 62)
3	To adjust the volume, use VOL q/w.
4	Select a listening mode and enjoy!
	See also:

•“Using the Listening Modes” (➔ page 32)

•“Audyssey” (➔ page 46)

■Operating on the AV receiver

1	Use the input selector buttons to select the input
	source.
2	Start playback on the source component.
3	To adjust the volume, use the MASTER VOLUME
	control.
4	Select a listening mode and enjoy!