Technics SA-DA8 Concerning the remote control, ABattery installation, B Correct method of use

A
	SA-DA10
	2
	1
	3
	(R6, AA, UM-3)
	3
	SA-DA8
	1
	2
	(R6, AA, UM-3)
B	Remote control signal sensor
Transmission

window	About 7 meters in front of the
	signal sensor. (The actual
	range will depend on the
	angle at which the remote
	control is used.)

C

Concerning the remote control

ABattery installation

Use of batteries

ÁAlign the poles (+ and –) properly when inserting the batteries. Press in and down towards the minus end.

ÁDo not mix old and new batteries or different types of batteries.

ÁDo not recharge ordinary dry cell batteries.

ÁDo not heat or disassemble the batteries. Do not allow them to contact flame or water.

ÁRemove the batteries if the unit is not to be used for a long time. ÁDo not keep together with metallic objects such as necklaces.

ÁDo not use rechargeable type batteries.

ÁDo not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

If electrolyte leaks from the batteries, consult your dealer.

Wash thoroughly with water if electrolyte comes in contact with any part of your body.

B Correct method of use

		use
Operation notes
		Before
ÁDo not place obstacles between the remote control	signal
the remote control unit free from dust.
sensor and remote control unit.

ÁDo not expose the remote control signal sensor to direct sunlight or to the bright light of a fluorescent light.

ÁTake care to keep the remote control signal sensor and end of

ÁIf the unit is installed in a rack with glass doors, the glass doors’ thickness or color might make it necessary to use the remote control a shorter distance from the unit.

To prevent damage

ÁNever place heavy items on top of the unit.

ÁDo not disassemble or reconstruct the unit.

ÁDo not spill water or other liquids into the unit.

C How to open the remote control SA-DA10 only

For your reference

This remote control can be used to operate the receiver you purchased and some other Panasonic and Technics cassette decks, MD decks, CD players, TVs, VCRs and DVD players, provided they are equipped with a remote control sensor.

SA-DA10 only

It is also possible to change-over the remote control code so that the remote control can operate TVs, VCRs and DVD players which have not been manufactured by this company (a pages 46–47).

Note

ÁFor details on operating other equipment, see the instruction

manual provided with specific unit.

ÁSome models cannot be operated by this remote control.

ÁActual operations depend on your equipment and software.

9

RQT5518