Technics SA-DA10 Enjoying the sounds, Press /l, Select the speaker systems to be used, Digital

1	2 5	3 4
		DIGITAL
1

Enjoying the sounds

Preparation: Set [VOLUME] to the “MIN” position.

1 Press [/l].

2 Select the speaker system(s) to be used.

A, B and BI-WIRE refer to the speaker terminals at the rear of the unit.

BI-WIRE and A, or BI-WIRE and B cannot be used at the same time.

“SURROUND” and “SFC” cannot be turned on if [B] is pressed.

If the button is pressed once more, the indicator will switch off and no sound will be heard from the speakers.

3 Turn [INPUT SELECTOR] to select desired source.

(Refer to the appropriate operating instructions for details.) Each time the selector is turned the display switches.

Note

2		SPEAKERS
	A	B	BI-WIRE

SPEAKERS

A

3 INPUT SELECTOR

Turn on the TV and select the input mode to suit the source (e.g. TV, VIDEO).

4 (only if you select TV, CD or DVD in the above step)

Press [DIGITAL INPUT] to select the desired input mode.

Each time you press the button, the display switches as follows.

DIGITAL ANALOG

The “DIGITAL” indicator lights when “DIGITAL” selected.

5 Press [DSP SOUND MODE] to select

						the desired mode.
						The SOUND MODE indicator corresponding to the selected
						mode lights and that mode is displayed.
PHONO	TUNER		CD	DVD
							Note
TAPE/MD		VCR 2	VCR 1		TV	ÁBe sure to select the mode appropriate to the source you
(TAPE)							are playing (a pages 20 and 21).
						ÁDolby Digital and DTS sources cannot be played with the

4		SFC modes.
	DIGITAL INPUT

(Continued on next page)

S

5 DSP SOUND MODE

PROGRAM FORMAT
L		C	R
LS	S	LFE	RS
	SOUND MODE
	SURROUND

22

RQT5518