Technics SA-DA10, SA-DA8 The radio, Sequential tuning, Turn INPUT SELECTOR to select “TUNER”

	2 3	1
	FM MODE, EON VGCA
1	INPUT SELECTOR

The radio

Sequential tuning

Use the tuning buttons to tune-in radio stations.

1 Turn [INPUT SELECTOR] to select “TUNER”.

2 Press [BAND] to select “FM” or “AM”.

3 Press [TUNING , , , PTY SELECTOR] (for the United Kingdom) or [TUNING , , ] (for Australia and New Zealand) to tune to the desired frequency.

“TUNED” lights up when tuned.

“STEREO” lights up when an FM stereo broadcast is received.

	To make an automatic search for stations
	Hold down [TUNING,	,	, PTY SELECTOR] (for the
	United Kingdom) or [TUNING,		, ] (for Australia and
	New Zealand) until the frequency begins to scroll. Tuning
	stops when a station is found. (Tuning may stop if there is
	interference.)
2 BAND
	If noise is excessive in the FM stereo mode

Press [FM MODE, EON] (for the United Kingdom) or [FM MODE]

	MHz	(for Australia and New Zealand).
		(“STEREO” will go out, and “MONO” will light up).
		The broadcast will be monaural, but noise will be reduced.
Selected band
		If the button is pressed once more, the stereo mode resumes.

3 TUNING

PTY SELECTOR

TUNED STEREO

SPEAKERS

A

If there is hissing or thumping while the radio is playing

Turn VGCA on.

This turns DSP off and can improve sound. (\ Page 27 for details about VGCA.)

	For your reference
	The tuner can pick up interference from DVD players. If this
	occurs turn the DVD player off.
MHz	To change the AM frequency step
	Press and hold [BAND] for about 3 seconds when AM band is

selected. (The frequency step changes from 9 kHz to 10 kHz.)

To return to the previous step, press and hold [BAND] for about 3 seconds again.

28

RQT5518