LG Electronics N1742LP Using the Monitor, Connecting the Display, Wall-outlet type, Analog signal

Connecting the Display

Using the Monitor

1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2 .

1Connect peripheral devices

2Connect LAN Cable (X550 port)

Analog signal

X-PORT D-sub

Wall-outlet type

(Make sure to connect X550 port,not LAN port of PC)

X550 port

Up to 5 ports are supported per X550 PCI Card. Up to 5 ports can be connected if necessary. (These items are not included for all models.)

Keyboard/Mouse Input LAN cable should be connected before boo- ting PC.(This item must be purchased separately.)

Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in.

When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume.

It is recommended to use a PS/2-type keyboard/mouse.

To use the monitor keyboard/mouse properly, it must be connected to the PC.

Applications that require other than 16 bit color quality and the set resolution are not supported.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or titled screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.

2. Press button on the front switch panel to turn the power on.

A8