Manuals / LG Electronics / Computer Equipment / Computer Monitor

LG Electronics N1942L Positioning your display, Connecting the Display, You can hurt your finger

Models: N1942L N1742LP N1742L

1 29

Download 29 pages 51.99 Kb

Page 8

Image 8

Connecting the Display

5. Pushing the PUSH button, Take the stand base from stand body.

Warning:

You can hurt your finger.

Good Position

Bad Position

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Positioning your display

1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range : -5˚~20˚

When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.

Page 8

Image 8

LG Electronics N1942L manual Positioning your display, Connecting the Display, You can hurt your finger, Tilt Range -5˚~20˚

Contents

User’s Guide Network MonitorN1742L N1742LP N1942L Accessories This accessories may look different from those shown herePower Cord 15-pin D-Sub Signal CableImportant Precautions On SafetyDo not Open the Display To Avoid Personal InjuryOn Installation Important PrecautionsOn Cleaning On RepackingOn Disposal Only, Hg lamp used LCD Monitor Important PrecautionsConnecting the Display Connecting the standDisassembling the stand Connecting the Display1. Put a cushion or soft cloth on aflat surfacePositioning your display Connecting the Display5. Pushing the PUSH button, Take the stand base from stand body You can hurt your fingerUsing the Computer Connecting the DisplaySelf Image Setting Function is executed automatically Analog signalUsing the Monitor Connecting the Display2. Press button on the front switch panel to turn the power on Analog signalConnecting the Display CoreAs shown in the image below,fit the ferrite core to the LAN cable The ferrite core needs to be separated from the mold by 5 centimetersConnecting to a X550 port using a LAN cable Connecting the DisplayControl Panel Functions Front Panel ControlsControl Use this button to enter or exit from the On Screen DisplayVOLUME AUTO IMAGE ADJUSTMENTPower Button Power IndicatorOn Screen Display OSD Control Adjustment Screen AdjustmentOn Screen DisplayOSD Selection and Adjustment SETUPMain menu Sub-menuPress the MENU Button, then the main menu of the OSD appears Main MenuIcons Button Tip Sub-menusPICTURE COLORMain menu Sub menuTRACKING On Screen DisplayOSD Selection and AdjustmentPHASE Main menuSETUP On Screen DisplayOSD Selection and AdjustmentLANGUAGE OSD POSITION WHITE BALANCE POWER INDICATOR MENU Exit FACTORY RESETOn Screen DisplayOSD Selection and Adjustment Sub menuDescription MOVIETroubleshooting Check the following before calling for serviceIs the power indicator light on? Do you see a CHECK SIGNAL CABLE message on the screen?Display image is incorrect Display Position is incorrectOn the screen background, vertical bars or stripes are visible TroubleshootingDisplay image is incorrect The screen blinksTroubleshooting Specifications ResolutionPower DimensionsN1942L SpecificationsResolution PowerSpecifications D-SUB Preset Modes ResolutionX-PORT Preset Modes Resolution IndicatorKensington Security Slot Installing the Wall mount plateWall mount plateSeparate purchase Digitally yours