Manuals / LG Electronics / Computer Equipment / Computer Monitor

LG Electronics N1742LP, N1942L manual Disassembling the stand, Connecting the Display, surface

Models: N1942L N1742LP N1742L

1 29

Download 29 pages 51.99 Kb

Page 7

Image 7

Connecting the Display

Disassembling the stand

1. Put a cushion or soft cloth on aflat	2. Place the monitor face Down on the
surface.	cushion or soft cloth.

3.Change your lock on the product as it follows and turn it in the arrow direction.

If you can't release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it.

4. Pull out the Stand to remove.

Page 7

Image 7

LG Electronics N1742LP Disassembling the stand, Connecting the Display, Put a cushion or soft cloth on aflat, surface

Contents

N1742L N1742LP N1942L Network MonitorUser’s Guide 15-pin D-Sub Signal Cable AccessoriesThis accessories may look different from those shown here Power CordTo Avoid Personal Injury Important PrecautionsOn Safety Do not Open the DisplayImportant Precautions On InstallationImportant Precautions On CleaningOn Repacking On Disposal Only, Hg lamp used LCD MonitorConnecting the stand Connecting the Displaysurface Disassembling the standConnecting the Display 1. Put a cushion or soft cloth on aflatYou can hurt your finger Positioning your displayConnecting the Display 5. Pushing the PUSH button, Take the stand base from stand bodyAnalog signal Using the ComputerConnecting the Display Self Image Setting Function is executed automaticallyAnalog signal Using the MonitorConnecting the Display 2. Press button on the front switch panel to turn the power onThe ferrite core needs to be separated from the mold by 5 centimeters Connecting the DisplayCore As shown in the image below,fit the ferrite core to the LAN cableConnecting the Display Connecting to a X550 port using a LAN cableUse this button to enter or exit from the On Screen Display Control Panel FunctionsFront Panel Controls ControlPower Indicator VOLUMEAUTO IMAGE ADJUSTMENT Power ButtonScreen Adjustment On Screen Display OSD Control AdjustmentSub-menu On Screen DisplayOSD Selection and AdjustmentSETUP Main menuButton Tip Sub-menus Press the MENU Button, then the main menu of the OSD appearsMain Menu IconsSub menu PICTURECOLOR Main menuMain menu TRACKINGOn Screen DisplayOSD Selection and Adjustment PHASEFACTORY RESET SETUPOn Screen DisplayOSD Selection and Adjustment LANGUAGE OSD POSITION WHITE BALANCE POWER INDICATOR MENU ExitMOVIE On Screen DisplayOSD Selection and AdjustmentSub menu DescriptionDo you see a CHECK SIGNAL CABLE message on the screen? TroubleshootingCheck the following before calling for service Is the power indicator light on?Troubleshooting Display image is incorrectDisplay Position is incorrect On the screen background, vertical bars or stripes are visibleTroubleshooting The screen blinksDisplay image is incorrect Dimensions SpecificationsResolution PowerPower N1942LSpecifications ResolutionIndicator SpecificationsD-SUB Preset Modes Resolution X-PORT Preset Modes ResolutionWall mount plateSeparate purchase Installing the Wall mount plateKensington Security Slot Digitally yours

Disassembling the stand

1. Put a cushion or soft cloth on aflat

2. Place the monitor face Down on the

surface.

cushion or soft cloth.

4. Pull out the Stand to remove.