6
Using the Keyboard (continued)
5. Next, slide your handheld onto the
docking connector gently until it is
firmly in place. Your PDA will power
on automatically. Tilt it upward and
position the flat support to the
desired angle.
6. To remove the handheld after use, tilt
the PDA forward while holding down the
keyboard until you hear the connector “click”.
Then, gently lift off the keyboard.
7. Fold down the connector support
and slide in back to its storage
position.
8. Refold the Keyboard and place
it back into its protective
storage case.
P73836-F8P3501-pkg.qxd 5/23/02 2:01 PM Page 6