Connecting to other devices
2. Connecting TV
You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer.
1.Connect the CATV or antenna coaxial cable to the Antenna terminal on the rear of the monitor. You need to use a coaxial antenna cable.
2.Turn on the monitor.
3.Select TV using Source button among the external signal adjustment buttons.
4.Select a desired TV channel.
As this product is designed for NTSC signals only, you cannot view TV programs in countries where PAL or SECAM signals are used.
3. Connecting to a Macintosh
1.Connect the power cord for your monitor to the power port on the back of the monitor.
2.Connect the signal cable to the
3.For older model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (Not included) referring to the switch configuration table shown on its rear.
4.Turn on the monitor and Macintosh.
