1 Setting Up and Using Your PC
Connecting the Power Cables
Connecting the Power Cables
1Remove the warning label covering the computer’s power connector at the rear of the computer.
2Check that the correct voltage is selected for your country. (The voltage is set during manufacture, and should be already correct.)
230
115 |
230
115
| 3 Connect the power cables to the display and the computer. (The |
| connectors are shaped to go in one way only.) |
| 4 Connect the display’s power cable and the computer’s power cable |
| to grounded outlets. |
|
|
WARNING | For your safety, always connect the equipment to a grounded wall |
| outlet. Always use a power cable with a properly grounded plug such |
| as the one provided with this equipment or in compliance with your |
| national regulations. This PC is disconnected from the power by |
| removing the power cable from the power outlet. This means the PC |
| must be located close to a power outlet that is easily accessible. This |
| PC is as class 1 laser product. |
|
|
5
