Chapter 11 Two Color.fm Page 92 Wednesday, August 2, 2006 1:00 PM

Chapter 11

Connecting the Phone Line

8Select OK to go to the Point Dish/Signal screen.

9Select Cancel to exit the Point Dish menu. At this point, the receiver may walk you through a procedure to download software. If this prompt displays, follow the instructions and do not disturb the receiver until the nearby TV is displaying DISH Network video. Otherwise, press VIEW LIVE TV. After a few minutes, you should be watching TV.

CONNECTING THE PHONE LINE

You must keep the receiver connected to an active telephone line to order Pay-Per-View programs, use all of the DishHOME Interactive features, or other services from DISH Network with your remote control.

Note: You may be able to use a wireless modem jack. However, this may not support all the features of this receiver, such as Caller ID. See www.dishnetwork.com for compatible modem products.

Note: If you have a Digital Subscriber Line (DSL), you may have to install a DSL filter between the receiver’s back panel Phone Jack and the telephone wall jack to successfully connect with DISH Network. You can obtain a filter from your DSL provider.

Phone Line Connections

Run a telephone cable with a standard RJ-11 connector from the receiver’s back panel Phone Jack to an active telephone connection.

92

Page 98
Image 98
Dish Network 222 manual Phone Line Connections, Connecting the Phone Line