Dish Network 222 manual Switching Between Dual and Single Mode, Dual Mode Single Mode Indications

Chapter 02 Two Color.fm Page 13 Tuesday, July 25, 2006 3:02 PM

Receiver and Remote Controls

Dual and Single Modes

Switching Between Dual and Single Mode

Put the satellite receiver in Single or Dual Mode by pressing the front panel MODE button. Keep the following items in mind when switching the satellite receiver between Dual and Single Mode:

		Dual Mode		Single Mode
Indications	Dual Mode front panel		Single Mode front panel
	indicator lights.		indicator lights.
	Favorites Lists set up for		Only Favorites Lists set up
Favorites	both outputs (TV1 and TV2)		for TV1 are available. The
	are available.		lists for TV2 are not lost,
Lists
			they are simply unavailable
			in Single Mode.
	Parental Controls set up for		Parental Controls set up for
Parental	both outputs (TV1 and TV2)		only TV1 are available. The
	are available.		Parental Controls for TV2
Controls
			are not lost, they are simply
			unavailable in Single Mode.
	Closed Captioning (CC)		CC from the receiver is
Closed	from SD and HD		available on both outputs
	programming is available on		(TV1 and TV2).
Captioning	TV1. CC is available on TV2
	only when enabled on the
	TV).

Note about changing from Dual to Single Mode: If someone is using the TV2 outputs in Dual Mode, you will see a popup on the nearby TV warning you that you are about to disrupt the use of the TV2 outputs.

13