Reference Two Color.fm Page 113 Tuesday, July 25, 2006 3:08 PM

 

 

 

Reference

 

 

 

Troubleshooting Tables

 

Timers

 

 

 

 

 

 

 

 

 

 

 

 

 

What Is Happening

Possible Reason

What to Do

 

 

 

 

 

 

 

 

 

 

You set an event timer.

• The program may have

• Use the Start 1 min. early option to start any event

 

 

 

The event timer misses the

started a little earlier than

timer one minute early, except for a Pay-Per-View

 

 

 

beginning or the end of a

scheduled, or it may have run

event.

 

 

 

program.

over its scheduled ending

• Use a manual event timer to start any event timer

 

 

 

 

time.

 

 

 

 

at the times you set yourself, except for a Pay-

 

 

 

 

 

Per-View event.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Hearing A Program

 

 

 

 

 

 

 

 

 

 

 

 

What Is Happening

Possible Reason

What to Do

 

 

 

 

 

 

 

 

 

 

 

The receiver front panel Power

• You may have muted the

• Check the volume level on the TV or audio

 

 

 

 

light is on and there is a good

sound, or set the volume so

device. Turn off the mute or turn up the volume,

 

 

 

 

picture on the TV set, but you

low that you cannot hear it.

as required.

 

 

 

 

do not hear any sound.

 

 

 

 

 

 

 

• The audio connections may

• Check the audio connectors and cables from the

 

 

 

 

 

not be properly connected.

receiver to the TV or the sound system.

 

 

 

 

 

 

• Check the TV speakers or the sound system.

 

 

 

 

 

 

• In the Dolby Digital menu, select Dolby Digital/

 

 

 

 

 

• You have selected Dolby

PCM for the audio output. If your decoder/

 

 

 

 

 

amplifier will not accept Linear PCM digital input,

 

 

 

 

 

Digital Only when there is no

use the analog connections instead.

 

 

 

 

 

Dolby Digital soundtrack.

 

 

 

 

 

 

 

 

 

 

 

 

You hear a foreign language

• You may have set the receiver

• Use the Alternate Audio Language menu to

 

 

 

 

with a program.

to select an alternate audio

select the language that you prefer.

 

 

 

 

 

language. The program may

 

 

 

 

 

 

be in a foreign language.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Caller ID

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

What Is Happening

Possible Reason

What to Do

 

 

 

 

 

 

 

 

 

Caller ID is not working.

• You do not have Caller ID

• Verify that Caller ID is a service provided by your

 

 

 

 

service from your local phone

local phone company.

 

 

 

 

company.

 

 

 

 

 

 

• Your phone line is not

• Verify that you have connected the phone line to

 

 

 

 

connected to the phone jack

the phone jack on the back of the receiver.

 

 

 

 

on the back of the receiver.

 

 

 

 

 

 

• You do not have the Caller ID

• Verify that you have enabled Caller ID (page 75).

 

 

 

 

option enabled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

113

Page 139
Image 139
Dish Network 222 manual Hearing a Program, Caller ID