Introduction 3
How to Use this Guide
Guide Conventions•The names of remote control buttons are all uppercase.
Example: Press SAT.
•Select means to move the highlight to an on-screen option or choice in a list and press
SELECT on the remote control.
Example: Select the Locks option.
•Where this guide mentions nearby TV, it refers to the TV near the receiver. The nearby TV
receives TV1 menus and programming from the receiver’s TV1 outputs and is connected
using short audio/video cables.
•Where this guide mentions remote TV, it refers to the cable-ready TV(s) located in rooms away
from the receiver. The remote TV receives TV2 menus and programming from the receiver’s
TV2 outputs through your in-home cable system.
•Where this guide mentions remote control, it refers to either Remote Control 1 when viewing a
nearby TV or Remote Control 2 when viewing the remote TV(s). If a specific remote control
must be used, this guide will refer directly to Remote Control 1 or Remote Control 2.
•The instructions in this guide are shown in two ways:
–Instructions in the form of pictures are handy if you’d like to learn something quickly.
These instructions are numbered left to right as shown in the sample below.
–Instructions that are written out are helpful if you’d like to learn more details.
Chapter 01 Two Color.fm Page 3 Tuesday, July 25, 2006 2:58 PM