2 How to Install Accessories In Your PC

Removing and Replacing the Cover

Removing and Replacing the Cover

Removing the Cover

1Switch off the display and computer.

2Disconnect all power cables and any telecommunications cables.

3If necessary, unlock the cover using the key on the front panel.

4Lift the two latches on the front sides of the computer upwards. Slide the cover forwards and off the computer.

Replacing the Cover after Installing Accessories

1Ensure that you have installed all your accessories and that all internal cables are properly connected and safely routed.

2Ensure that the two latches on the front sides of the cover are upwards, and that the lock is unlocked.

3Slide the cover onto the computer, making sure that the two guides at the bottom of the case slide into the two rails at the base of the computer. Firmly slide the cover backwards into position.

4Lower the two latches on the front sides of the cover.

5If required, lock the cover using the key provided.

6Reconnect all the power cables.

13

Page 23
Image 23
HP HEWLET VECTRA VA 6/XXX manual Removing and Replacing the Cover, Removing the Cover