1 Setting Up and Using Your PC

Starting and Stopping Your PC

Starting and Stopping Your PC

Starting Your PC

1Before you start your PC, always switch on the display first.

2Start your PC in one of these ways:

press the power button on the front panel

press the space bar.

When you switch on the computer, the computer carries out the Power-On-Self-Test (POST) while the Vectra logo is displayed. If

you wish to view the POST details, press to get the HP Summary Screen. If there is an error in the POST, the error will automatically be displayed.

3If you have set a password in the PC’s Setup program, the password prompt displays after the POST has completed. If the Password

prompt is displayed, type your password and press to be able to use the PC.

Stopping Your PC

To stop the PC, make sure that you have exited all programs and the operating system (if necessary), and then press the power button on the control panel.

Refer to the operating system manual for details of how to exit the operating system.

6

Page 16
Image 16
HP HEWLET VECTRA VA 6/XXX manual Starting and Stopping Your PC, Starting Your PC