2 How to Install Accessories In Your PC

 

 

 

 

Installing Mass Storage Devices

 

The following table explains which connectors you should use when

 

you install additional devices.

 

 

Configuration

 

Connections to Data Cables

 

1 Hard Disk Drive

1. Bootable hard disk drive:

First connector, Primary IDE Cable

 

2 Hard Disk Drives

1. Bootable hard disk drive:

First connector, Primary IDE Cable

 

 

2.

Second hard disk drive:

Second connector, Primary IDE Cable

 

3 Hard Disk Drives

1. Bootable hard disk drive:

First connector, Primary IDE Cable

 

 

2.

Second hard disk drive:

Second connector, Primary IDE Cable

 

 

3.

Third hard disk drive:

Secondary IDE Drive Cable Connector

 

4 Hard Disk Drives

1. Bootable hard disk drive:

First connector, Primary IDE Cable

 

 

2.

Second hard disk drive:

Second connector, Primary IDE CableCD-

 

 

3.

Third hard disk drive:

Secondary IDE Drive Cable Connector

 

 

4.

Fourth hard disk drive:

Secondary IDE Drive Cable Connector

NOTE

When connecting hard disk drives, note that if the drives are connected

 

to the same data cable, and the drives operate in different modes (or

 

speeds), the slower speed will be used. To avoid possible degradation of

 

disk performance, it is recommended that, whenever possible, hard disk

 

drives are placed on different cables.

 

 

There are two different types of connectors—these are shown below.

 

 

 

 

Power Cables for

 

 

 

 

Hard Disk Drives,

 

 

 

 

Tape Drives, and

 

 

 

 

CD-ROM Drives

 

 

 

 

Power Cable for 3.5-

 

 

 

 

inch Flexible Disk

 

 

 

 

Drive

Some of the power connectors will already be connected to devices. If you install a device that requires a different connector, the connector converter should be supplied with the device.

21

Page 31
Image 31
HP HEWLET VECTRA VA 6/XXX manual You install additional devices, Configuration Connections to Data Cables