25
SNMP Configuration: IP Trap Manager
==================
IP Address Community Name Status
1. 192.168.1.254 public ENABLED
2. 0.0.0.0
3. 0.0.0.0
4. 0.0.0.0
5. 0.0.0.0
<Apply> <OK>
<Cancel>
The IP address of entry 1. |
READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
IP Address IP address of the trap manager.
Community Name A community specified for trap management access.
Status Sets administrative status of selected entry to enabled or disabled.
2.4.4.User Log-in Configuration Use the User Configuration menu to restrict management access based on specified
user names and passwords. There are two user types, Administrator and Guest. Only
the Administrator has write access for parameters governing the SNMP agent. You
should therefore assign a user name and password to the Administrator as soon as
possible, and store it in a safe place. The parameters shown on this screen are
indicated in the following figure and table.