73

2.5.7.3.Configuring IP Address Filters

If any node presents a security risk, you can filter all traffic for this node by entering its
address into the IP Security Filter. Any packet passing through the switch that has a
source or destination IP address matching an entry in this table will be filtered.
IP Security Filtering Configuration
===================================
-----------------------------------------------------------------
---
10.1.1.1
Page 1 <Apply> Total 0 Pages
<OK> <Prev Page> <Next Page> <Add>
Return to previous panel.
Use <TAB> or arrow keys to move. <Enter> to select.
Note:
To add an IP address to the security filter, use <Add>. To delete an address,
highlight it with the cursor and select Enter.
Use the <Next Page> and <Prev Page> buttons to scroll through the table. To
display a specific page, set the page number in the Page field and then select
<Apply>. To add an entry, select <Add>.
2.6.Monitoring the Switch
The Network Monitor Menu provides access to port statistics, address tables, STA
information, VLANs registration and forwarding information and multicast groups. Each
of the screens provided by these menus is described in the following sections.