9033060 ELH100-12/24TXU ser Interface 41
Port Configuration Menu

SelectAdministrative Status Control from the Port Configuration screen,

thenselect the port group to configure, either “1 thru 12,” “13 thru 24,”or

“Switch/MediaModule” (if installed). The following screens showthe

configurationoptions.

Port Administrative Status Control Menu

Figure3-11. Port Administrative Status Control Menu

PortAdministrati ve StatusCo ntrol (1 - 12)
===========================================
HubID: 1 Model:ELH100 -12TX
Port AdminState LinkState AutoPartitioned Mode Speed(Mb/s)
--- -------- ------- ----------- ---- -----------
1 Enab led No Link No Auto
2 Enab led No Link No Auto
3 Enab led No Link No Auto
4 Enab led No Link No Auto
5 Enab led No Link No Auto
6 Enab led No Link No Auto
7 Enab led No Link No Auto
8 Enab led No Link No Auto
9 Enab led No Link No Auto
10 E nabled No L ink No Auto
11 E nabled No L ink No Auto
12 Enabled Link No Auto 100
<APPLY> <OK> <CANCEL> <PREV_SCREEN> <NEXT_SCREEN>
Usethe space bar to t oggle states
Use<TAB> or cursor keys to move, <SPACE> to toggle, <ENT ER> to select
Selection Description
AdminState Allowsyou to disable a port due toabnormal behavior such
asexcessive collisions, and re-enable it after the problem
hasbeen resolved. You may also disable a por tf or security
reasons.
LinkState Indicatesif the port has a validconnection to an external
device.
AutoPartitioned Indicatesif the port is partitioned.
Mode Setsthe transmission speed to 10 Mbp s, 100 Mbps or auto-
detection.
Speed Indicatesthe transmission speed currently used by this port.