Cabletron Systems ELH100 manual Slip IP

SLIP IP	IP address of the Agent Module used when accessing
	the configuration program via an out-of-band SLIP
	connection to the serial port.
	The hub does not allow the SLIP IP address to be the
	same as the IP address.
SLIP Subnet Mask	Subnet mask for the SLIP IP address used by the Agent
	Module.
SLIP Gateway	SLIP gateway IP address used to pass traffic to the
	network management station. Note that the gateway
	must be defined if the management station is located in
	a different IP segment.
Max # of allowed	The maximum number of Telnet sessions allowed to
Telnet sessions	simultaneously access the Agent Module.
	Note: The maximum number of management sessions
	(not necessarily Telnet sessions) is 2.
Agent Ethernet Port	The network segment (10 Mb/s or 100 Mb/s) to which
Attached to	the Agent Module is attached.

34 ELH100-12/24TX User Interface ELH100-12/24TX