66 Web-Based Man agement ELH100-12/24TX
Agent Configuration

Select“Agent” then “Agent Configuration” to display IP configuration and

otherinformation.

Item Description
IPAddress IPaddress of the Agent Module you are managing. Valid IP
addressesconsist of four numbers, of 0 to 255 , ands eparated
byperiods. (The default address is 0.0.0.0.)
SubnetMask Subnetmask of the Agent M odule you are managing. This
maskidentifies the host address bits used for routing to specific
subnets.(The default subnet mask is0.0.0.0.)
GatewayIP Gatewayusedto pass trap messages from the management
agentto the network m anagement station. Note that the
gatewaymust be defined if the manageme nts tation is located
ina different IP segment. (The default gateway is 0.0.0.0.)
SLIPIP IPaddress of the Agent Module used when accessing the
configurationprogram via an out- of-band SLIP connection to
theserial port.
SLIPSubnet Mask Subnetmask for the SLI P IP address of the Agent Module.
SLIPGateway SLIPgateway IP address used to pass traffic to the network
managementstation. Note that the gateway mustbe defined if
themanagement station is l ocated in a different IP segment.
AgentAttached to Thenetwork segment (10 Mbpsor 100 Mbps ) to which the
AgentModule is attached.