9033060 Installation 21
Youcan also make a remote network connection (via modems) to the
serialport on the Agent Module using SLIP protocol over TCP/IP. Using
thiskind of connection, the system functions similar to a router, allowing
youto manage the hub or other attached devices using Telnet, a web
browser,or network management software.
Agent Module
Table2-2 provides information for the Agent Module
availablefor the
ELH100-12/24TX.
Table2-2. AgentModule
Priorto accessing the hub via a SLIP connection, first
configureit with a valid SLIP IP address, subnet mask,
anddefault gateway.
Theon-board program only pro vides access to basic
configurationfunctions. To access thefull range of
SNMPmanagement functions, you must use SNMP-
basednetwork manag ement software.
PartNumber Functions Description
ELH100-SNMP RMON/SNMP/
WebManage-
ment
AgentModule used to manage the hub (or attached
stack).Includes RS-232 serial port for console con-
nection.One backup agent module can be in-
stalledin the stack.