14 Installation ELH100-12/24TX
Mounting the Hub or Stack on a Table or Shelf
Youcan mount a standalone hub (or a stack of up to six hubs) on a table
orshelf. Locate the hub (stack) in a position that allows access to the front
panelRJ-45 ports, visibility of the port LEDs, and access to the power
cord.Make sure that the mounting surface can safely support the hub
(stack)and that there is adequate space around the hub (stack) for
ventilationand cooling.
1. Thehub ships with four (4) rubber feet.Stick the self-adhesive rubber
footpads on each of the four concave spaces located on the bottom
ofthe hub. The rubber foot pads cushion the hub against shock/
vibrationsand provide space between each hub for ventilation.
2. Ifyou want to stack hubs, repeat step 1 for each hub to be stacked.
Placethe first hub on a firm flat surface where you want to install the
stack.Stack the other hubs on top of this unit.
3. Referto "Connecting Hubs to the Stack’s Backplane" on page 16.