LevelOne GSW-2600TXM manual 112

Switch Information	Shows hardware / firmware version numbers, power status, and
	expansion modules used in the switch.
Management Setup Menu
Network	Configures the switch’s network parameters.
Configuration¹
Serial Port	Sets communication parameters for the serial port, including
Configuration	baud rate, console timeout, and screen data refresh interval.
SNMP Configuration	Activates authentication failure traps, configures community
	access strings and trap managers.
User Configuration	Sets the user names and passwords for system access.
TFTP Download	Downloads new version of firmware to update your system
	(in-band).
Configuration File	Saves or restores configuration data based on the specified file.
Device Control Menu
System Mode³	Sets the switch to operate as a Layer 2 switch or as a multilayer
	routing switch.
Layer 2 Menu	Configures port communication mode, mirror ports, port trunking,
	and static addresses.
Bridge Menu	Configures GMRP and GVRP for the bridge, as well as Spanning
	Tree settings for the global bridge or for specific ports.
VLAN Menu	Configures VLAN settings for specific ports, and defines the port
	membership for VLAN groups.
IGMP Snooping	Configures IGMP multicast filtering.
Configuration¹
IP Menu²	Configures the subnets for each VLAN group, global
	configuration for ARP and ARP proxy, unicast and multicast
	protocols, BOOTP / DHCP relay, static ARP table entries, static
	routes and the default route.
Security Menu	Configures MAC and IP² address filtering.
Network Monitor Menu
Port Statistics	Displays statistics on port traffic, including information from the
	Interfaces Group, Ethernet-like MIB, and RMON MIB.
Layer 2 Address	Contains the unicast address table.
Table
Bridge Menu	Displays Spanning Tree information for the overall bridge and for
	specified ports.
VLAN Menu	Displays dynamic port registration information for VLANs, as well
	as all VLAN forwarding information for static and dynamic
	assignment.
IP Multicast	Displays all the multicast groups active on this switch, including
Registration Table¹	the multicast IP addresses and corresponding VLANs.
IP Menu²	Displays all the IP subnets used on this switch, as well as the
	corresponding VLANs and ports. Also contains the ARP table,
	routing table, multicast table, and OSPF table.

112