2.2.Main Menu
With the system configuration program you can define system parameters, manage and control the switch and all its ports, or monitor network conditions. The screen below of the Main Menu and the table following it briefly describe the selections available from this program.
Note:
Options for the currently selected item are displayed in the highlighted area at the bottom of the interface screen.
Intelligent Layer3 Switch¹
Multilayer Mode*
Main Menu
=========
System Information Menu...
Management Setup Menu...
Device Control Menu...
Network Monitor Menu...
System Restart Menu...
Exit
Display or change system information.
Use <TAB> or arrow keys to move. <Enter> to select.
1.For Management Model, it will display “Management Switch”.
*.The operation mode is only display on intelligent switch.
Menu | Description |
(Operation Mode)³ | The text string in the top right corner of the screen shows if the |
| switch is operating as a Layer 2 switch or as a multilayer |
| routing switch. (See chapter 2 “setting the system operation |
| mode”.) |
System Information Menu | |
System Information | Provides basic system description, including contact |
| information. |
Switch Information | Shows hardware / firmware version numbers, power status, and |
| expansion modules used in the switch. |
Management Setup Menu | |
Network Configuration | Includes IP setup¹, Ping facility, and HTTP (Web agent) setup. |
Serial Port | Sets communication parameters for the serial port, including |
Configuration | baud rate, console timeout, and screen data refresh interval. |
14
