GMRP | Enabled | Enables or disables GMRP for this port. When enabled, this port |
|
| will allow endstations to register with multicast groups using |
|
| GMRP. |
|
| Note that GMRP must be enabled for the switch before this |
|
| setting can take effect (chapter 2 “Configuring Global Bridge |
|
| Settings”). |
|
| IGMP and IGMP Snooping also provide multicast filtering. (See |
|
| “IGMP Protocol” on chapter 4.) |
Ingress | Disabled | If enabled, incoming frames for VLANs which do not include this |
Filtering4 |
| ingress port in their member set will be discarded at the ingress |
|
| port. |
4.This control does not affect VLAN independent BPDU frames, such as GVRP or STP. However, they do affect VLAN dependent BPDU frames, such as GMRP.
2.5.4.2.VLAN Table Configuration
Use this screen to create a new VLAN or modify the settings for an existing VLAN.
VLAN Menu: VLAN Table Configuration
=========
Port | 1 | 2 |
|
VLAN | 12345678901234567890123456 | ||
1 | SSSSSSSSSSSSSSSSSSSSSSSSSS | ||
Normal
S:
Static
R:
Reg. Fixed
X:
Forbidden
Page : 1 | <Apply> | Total: 1 | Pages |
|
<OK> | <Prev Page> | <Next Page> | <Add> | |
Enter page number than press 'Apply' to see VLAN group. | ||||
READ/WRITE
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter | Description |
VLAN | The ID for the VLAN currently displayed. |
| Range: |
46
