LevelOne GSW-2600TXM manual 10/100BASE-T Auto

Parameter	Default	Description
Link Status		Indicates if the port has a valid connection to an external
		device.
Admin	Enabled	Allows you to disable a port due to abnormal behavior
Status		(e.g., excessive collisions), and then enable it after the
		problem has been resolved. You may also disable a port
		for security reasons.
Auto	Enabled	Enables or disables auto-negotiation for the following
Negotiate*		features
		Port Type	Speed	Duplex Mode	Flow
					Control
		10/100BASE-T	auto	auto	auto
		100BASE-FX	100M	full duplex	auto
		1000BASE-SX/LX 1000M		full duplex	auto
		1000BASE-T	1000M	full duplex	auto
		The 10/100BASE-TX ports can autonegotiate the speed
		to 10/100 Mbps, and the transmission mode to half / full
		duplex. The 100BASE-FX, 1000BASE-SX/LX, and
		1000BASE-T modules are all fixed at the indicated speed
		and duplex mode. All media types can auto-negotiate
		flow control.
Default Type	10M-Half-Duplex	If auto-negotiation is disabled, the port will be set to the
		indicated speed and duplex mode.
Current		Indicates the current speed and duplex mode.
Type

122