them or the corresponding IP interface from this switch.
Static Route Table
==================
Destination Network Destination Mask VLAN Next Hop Type
| Page | 1 | <Apply> | Total | 0 | Pages | ||
| <OK> |
| <Prev Page> | <Next Page> | <Add> | |||
|
|
|
| Return to previous panel. |
|
| ||
|
| Use <TAB> or arrow keys to move. <Enter> to select. | ||||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |
Parameter |
| Description |
|
|
|
| ||
Destination |
| A destination network, subnet or host. |
|
|
| |||
Network |
|
|
|
|
|
|
|
|
Destination |
| The subnet mask that specifies the bits to match. A routing entry will |
| |||||
Mask |
| be used for a packet if the bits in the address set by the destination |
| |||||
|
| mask match the Destination Network. |
|
|
| |||
VLAN |
| The VLAN within which the gateway or destination address resides. |
| |||||
Next Hop |
| The IP address of the router at the next hop. |
|
|
| |||
|
| Note that the network portion of the next hop must match that used for |
| |||||
|
| one of the subnet IP interfaces configured on this switch. (See “Subnet |
| |||||
|
| Configuration” on chapter 2.) |
|
|
|
| ||
Type |
| The IP route type for the destination network. This switch supports the |
| |||||
|
| following types: |
|
|
|
| ||
|
| Direct |
| - A directly connected subnetwork. |
|
|
| |
|
| Indirect |
| - A remote IP subnetwork or host address. |
|
| ||
|
|
|
|
|
|
|
|
|
Note:
Use the <Next Page> and <Prev Page> buttons to scroll through the static route table. To display a specific page, set the page number in the Page field and then select <Apply>. To modify a static route, highlight the entry in the table and select Enter. To add a static route, select <Add>.
Adding a Static Route - The same screen is displayed for modifying or adding a static route. You must provide route information as described in the preceding table, plus the routing metric used to indicate the number of hops to the destination network.
69
