chapter 3.)
Parameter | Default | Description |
IGMP | 5 | A switch port that stops receiving multicast protocol packets for |
Router |
| this interval will be removed from the IGMP forwarding list. |
Timeout |
| Range: 3 - 5 minutes |
IGMP | 5 | The time between last spotting an IGMP Report message for an |
Group |
| IP multicast address on a specific port and the switch removing |
Timeout |
| that entry from its list. |
|
| Range: 3 - 5 minutes |
|
|
|
3.6.6.3.Static ARP Configuration
Use the following screen to display or edit entries in the Static ARP Table. Entries added to this table are retained until the associated IP interface is deleted or the switch is reset to the factory defaults.
| Parameter | Description |
|
|
| ||
| IP Address | IP address statically mapped to a physical MAC address. |
|
| MAC Address | MAC address statically mapped to the corresponding IP address. |
|
| Interface | The index number of the IP interface that will use this static ARP entry. |
|
|
| See chapter 3 “Subnet Configuration” or chapter 3 “Displaying Subnet |
|
|
| Information”. |
|
| Note: |
|
|
To add a static address, specify it in the dialog box at the bottom of the screen, and press Add. To delete a static address, click on the edit icon (
) for the required entry, and then press Delete.
148
