110
Parameter Description
Type Shows port type as:
100BASE-TX : 10BASE-T / 100BASE-TX
100BASE-FX : 100BASE-FX
1G BASE-SX/LX : 10000BASE-SX/LX (multimode/ single mode)
1G BASE-T : 1000BASE-T
Admin Status Shows if the port is enabled, or has been disabled due to abnormal
behavior or for security reasons. See “Configuring Port Parameters”
on chapter 3.
Link Status Indicates if the port has a valid connection to an external device.
Speed Status Indicates the current port speed.
Duplex Status Indicates the port’s current duplex mode.
Flow Control
Status
Shows the flow control type in use. Flow control can eliminate frame
loss by “blocking” traffic from end stations connected directly to the
switch.
VLAN ID The VLAN ID assigned to untagged frames received on this port. Use
the PVID (chapter 3 “VLAN Port Configuration”) to assign ports to the
same untagged VLAN.
3.2.5.Configuring the Serial Port If you are having difficulties making an out-of-band console connection to the serial port
on the switch, you can display or modify the current settings for the serial port through
the Web agent. Click on the serial port icon in the switch image to display or configure
these settings, as shown below.