92
display a specific page, set the page number in the Page field and then select
<Apply>. Select <Flush RIP> to clear any routing entries learned through RIP.
Displaying Detailed Routing Information
To display detailed routing information, select any entry in the Routing Table with your
cursor and select Enter. The following screen will display. All items displayed on this
page are the same as those shown in the Routing Table, except for Routing Metric,
which represents a relative measure of the path cost from this switch to the destination
network. (Note that this metric depends on the specific routing protocol.)
Detailed Routing Entry
======================
Destination Address: 192.168.1.0
Destination Mask : 255.255.255.0
VLAN : 1
Next Hop : 192.168.2.10
Type : Direct
Protocol : Local
Routing Metric : 1
<OK>
Return to previous panel.
Use <Enter> to select.
You can use this menu to display all the multicast groups currently active on this switch,
the IGMP registration table, the multicast forwarding cache, and DVMRP routing
information.