Bridge Menu: Bridge Configuration
===========
Spanning Tree |
| : ENABLED |
|
|
GMRP |
| : DISABLED |
|
|
Bridge Priority | : 32768 |
|
| |
GVRP |
| : DISABLED |
|
|
Hello Time (in seconds) | : 2 | Priority |
| |
Threshold | : 4 |
|
|
|
Forward Delay (in seconds) : 15 | Aging Time (in seconds) : | |||
300 |
|
|
|
|
Max age (in seconds) | : 20 |
|
| |
| <Apply> | <OK> |
| <Cancel> |
| The status of the spanning tree. | |||
READ/SELECT
Use <TAB> or arrow keys to move, <Space> to scroll options.
Parameter | Default | Description |
Spanning | Enabled | Enable this parameter to participate in a STA compliant |
Tree |
| network. |
Bridge | 32,768 | Bridge priority is used in selecting the root device, root port, and |
Priority |
| designated port. The device with the highest priority becomes |
|
| the STA root device. However, if all devices have the same |
|
| priority, the device with the lowest MAC address will then |
|
| become the root device. |
|
| Enter a value from 0 - 65535. |
|
| Remember that the lower the numeric value, the higher the |
|
| priority. |
Hello Time | 2 | Time interval (in seconds) at which the root device transmits a |
|
| configuration message. |
|
| The minimum value is 1. |
|
| The maximum value is the lower of 10 or [(Max. Message Age / |
|
| 2) |
Forward | 15 | The maximum time (in seconds) the root device will wait before |
Delay |
| changing states (i.e., listening to learning to forwarding). This |
|
| delay is required because every device must receive |
|
| information about topology changes before it starts to forward |
|
| frames. In addition, each port needs time to listen for conflicting |
|
| information that would make it return to a blocking state; |
|
| otherwise, temporary data loops might result. |
|
| The maximum value is 30. |
|
| The minimum value is the higher of 4 or [(Max. Message Age / |
|
| 2) + 1]. |
|
| 40 |
