NETGEAR WNR2000 manual Clear the Disable Port Triggering check box

NETGEAR Wireless-N 300 Router WNR2000 User Manual

2.Select the Port Triggering radio button. The port triggering information displays.

Figure 5-4

3. Clear the Disable Port Triggering check box.

Note: If the Disable Port Triggering check box is selected after you configure port triggering, port triggering is disabled. However, any port triggering configuration information you added to the router is retained even though it is not used.

4.In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity time expires. This is required because the router cannot be sure when the application has terminated.

Fine-Tuning Your Network 5-11

v1.3, July 2009