NETGEAR
4.Click the 
button in the Add WPS Client screen. The Connecting to New Wireless Client screen displays.
Figure |
|
The green | button light on the WNR2000 router begins to blink in a regular pattern. While |
the button light is blinking, you have 2 minutes to enable WPS on the device you are trying to connect to the router.
5.In the wireless client, follow its specific networking instructions to enable WPS, to allow it to connect to the router.
The WNR2000 router’s green | button light ceases blinking and remains on when one of |
these conditions occurs: |
|
•The router and the client establish a wireless connection.
•The
Security PIN Entry
There are two ways to enable a wireless client to join a network using a PIN: using the router’s security PIN or using the wireless client’s security PIN.
Using the Router’s Security PIN
1.Obtain your router’s security PIN from the rear panel of the router or from the Advanced Wireless Settings screen.
2.On the wireless client, follow its specific networking instructions to enter the router’s security PIN and to establish a wireless connection with the router.
Using the Wireless Client’s Security PIN
1.Log in to the router as described in “Logging In To Your Wireless Router” on page
Safeguarding Your Network |
