Nortel Networks 450 manual Spanning Tree Port Configuration Screen 2

Using the BayStack 450 10/100/1000 Series Switch

				Spanning Tree Port Configuration
				Unit:	[ 1 ]
Port	Trunk		Participation		Priority	Path Cost	State
----	-----	-------------------			--------	---------	----------
15		[	Normal	Learning ]	128	5	Forwarding
16		[	Normal	Learning ]	128	5	Forwarding
17	1	[	Normal	Learning ]	128	10	Forwarding
18		[	Normal	Learning ]	128	10	Forwarding
19	4	[	Normal	Learning ]	128	10	Forwarding
20	4	[	Normal	Learning ]	128	10	Forwarding
21		[	Normal	Learning ]	128	10	Forwarding
22	5	[	Normal	Learning ]	128	10	Forwarding
23	5	[	Normal	Learning ]	128	10	Forwarding
24		[	Normal	Learning ]	128	10	Forwarding
25	2	[	Normal	Learning ]	128	10	Forwarding
26	2	[	Normal	Learning ]	128	10	Forwarding
27		[	Normal	Learning ]	128	10	Forwarding
28		[	Normal	Learning ]	128	10	Forwarding
Switch		[	Normal	Learning ]
Stack		[	Normal	Learning ]
Press Ctrl-P to display				choices for ports 1-14.
Use space bar to			display choices, press <Return> or <Enter> to select choice.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-30. Spanning Tree Port Configuration Screen (2 of 2)

	Table 3-25 describes the Spanning Tree Port Configuration screen fields.
Table 3-25.	Spanning Tree Port Configuration Screen Fields
Field	Description
Unit	This field only appears if the switch is participating in a stack configuration. The field
	allows you to select the number of the unit you want to view. To view another unit, type its
	unit number and press [Enter], or press the spacebar on your keyboard to toggle the unit
	numbers.
Port	Indicates the switch port numbers that correspond to the field values in that row of the
	screen (for example, the field values in row 2 apply to switch port 2). Note that the values
	in the Switch row affect all switch ports and, when the switch is part of a stack, the values
	in the Stack row affect all ports in the entire stack.
Trunk	The read-only data displayed in this column indicates the trunks that correspond to the
	switch ports specified in the Trunk Members fields of the Trunk Configuration screen (see
	“MultiLink Trunk Configuration” on page 3-37).
	(continued)

3-70 302401-D Rev 00