Nortel Networks 450 manual Describes the Snmp Configuration screen fields, Community String

Using the Console Interface

SNMP Configuration

The SNMP Configuration screen (Figure 3-4) allows you to set or modify the SNMP configuration parameters.

Choose SNMP Configuration (or press m) from the main menu to open the SNMP Configuration screen.

SNMP Configuration

Read-Only Community String: [ public ]

Read-Write Community String: [ private ]

Trap #1 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Trap #2 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Trap #3 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Trap #4 IP Address:	[ 0.0.0.0 ]
Community String:	[	]
Authentication Trap:	[ Enabled		]
Link Up/Down Trap:	[ Enabled		]

Enter text, press <Return> or <Enter> when complete.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 3-4. SNMP Configuration Screen

Table 3-3 describes the SNMP Configuration screen fields.

Table 3-3.	SNMP Configuration Screen Fields
Field		Description
Read-Only		The community string used for in-band read-only SNMP operations.
Community String		Default Value	public
		Range	Any ASCII string of up to 32 printable characters

302401-D Rev 00 3-13