Nortel Networks 450 manual AC Power Receptacle, International Power Cord Specifications

BayStack 450 10/100/1000 Series Switches

1 3

100-240V

47-63Hz~

Cascade Module

Redundant Power

1 = AC power receptacle

2

2 = RPSU connector

3 = Cascade Module Slot

BS45004A

Figure 1-5. BayStack 450 Switch Back Panel

AC Power Receptacle

The AC power receptacle accepts the AC power cord (supplied). For installation outside of North America, make sure that you have the proper power cord for your region. Any cord used must have a CEE-22 standard V female connector on one end and must meet the IEC 320-030 specifications. Table 1-2 lists specifications for international power cords:

Table 1-2. International Power Cord Specifications

Country/Plug description	Specifications	Typical plug
Continental Europe:	220 or 230 VAC
• CEE7 standard VII male plug	50 Hz
• Harmonized cord (HAR marking	Single phase
on the outside of the cord jacket
to comply with the CENELEC		228FA
Harmonized Document HD-21)
		(continued)

302401-D Rev 00 1-9