Using the Console Interface
302401-D Rev 00 3-35
Choose High Speed Flow Control Configuration (or press h) from the Switch
Configuration Menu screen to open the High Speed Flow Control Configuration
screen.
Figure 3-15. High Speed Flow Control Configuration Screen
Table 3-13 describes the High Speed Flow Control Configuration screen fields.
Table 3-13. High Speed Flow Control Configuration Screen Fields
Field Description
Unit Allows you to select the unit number (when stacking is configured ) to view or
configure. To view or conf igure anot her unit, type it s unit number and press
[Enter], or press the spacebar to toggle the unit numbers (the system only
displays a screen for units that are configured with a gigabit MDA).
(continued)
High Speed Flow Control Configuration
Unit: [ 2 ]
Autonegotiation: [ Enabled ]
Flow Control: [ Disabled ]
Preferred Phy: [ Right ]
Active Phy: None
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
kombk.book Page 35 Tuesday, June 29, 1999 3:25 PM