Nortel Networks manual Chapter Installing the BayStack 450 Switch

MultiLink Trunks	1-57
Client/Server Configuration Using MultiLink Trunks	1-58
Trunk Configuration Screen Examples	1-60
Trunk Configuration Screen for Switch S1	1-60
Trunk Configuration Screen for Switch S2	1-63
Trunk Configuration Screen for Switch S3	1-65
Trunk Configuration Screen for Switch S4	1-67
Before Configuring Trunks	1-69
MultiLink Trunking Configuration Rules	1-69
How the MultiLink Trunk Reacts to Losing Distributed Trunk Members	1-71
Spanning Tree Considerations for MultiLink Trunks	1-72
Additional Tips About the MultiLink Trunking Feature	1-75
Port Mirroring (Conversation Steering)	1-76
Port-Based Mirroring Configuration	1-77
Address-Based Mirroring Configuration	1-79
Port Mirroring Configuration Rules	1-82
Chapter 2
Installing the BayStack 450 Switch
Installation Requirements	2-1
Installation Procedure	2-3
Installing the BayStack 450 Switch on a Flat Surface	2-3
Installing the BayStack 450 Switch in a Rack	2-4
Attaching Devices to the BayStack 450 Switch	2-7
Connecting the 10BASE-T/100BASE-TX Ports	2-8
Connecting Fiber Optic Ports	2-9
Console/Comm Port	2-10
Connecting a Terminal to the Console/Comm Port	2-11
Connecting Power	2-12
Verifying the Installation	2-14
Verifying the Installation Using the LEDs	2-14
Verifying the Installation Using the Self-Test Screen	2-15
Initial Setup	2-17
Standalone Switch Setup	2-17
Stack Setup	2-20

302401-D Rev 00 ix