Nortel Networks 450 manual Vlan Workgroup Summary, Vlan Port Configuration Screen Example

BayStack 450 10/100/1000 Series Switches

VLAN Port Configuration

Unit:	[	1	]
Port:	[	8	]
Filter Tagged Frames:	[ No		]
Filter Untagged Frames:	[ No		]
Filter Unregistered Frames:	[ No		]
Port Name:	[ Student port ]
PVID:	[	3	]
Port Priority:	[	0	]
Tagging:	[Untagged Access]

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-29. VLAN Port Configuration Screen Example

VLAN Workgroup Summary

This section summarizes the VLAN workgroup examples discussed in the previous sections of this chapter.

As shown in Figure 1-30, switch S1 (a BayStack 450 switch) is configured with multiple VLANs:

•Ports 1, 6, 11, and 12 are in VLAN 1.

•Ports 2, 3, 4, 7, and 10 are in VLAN 2.

•Port 8 is in VLAN 3.

Because S4 does not support 802.1Q tagging, a single switch port on each switch must be used for each VLAN (see “ VLANS Spanning Multiple Untagged Switches” on page 1-38).

302401-D Rev 00 1-45